Installation of Industrial Large Fans (Part 2)

Views : 266
Author : JU LAI
Update time : 2023-06-20 08:23:05

After all the preparations for the industrial ceiling fan are ready, let's learn about the detailed installation steps of the industrial ceiling fan on site:

  1. Install the base plate Install the base plate according to the installation position (marked by a line), with both sides evenly spaced, the base plate perpendicular to the installation beam, the top surface of the cushion plate closely attached to the I-beam, and the installation pressure plate combined with the I-beam. After installing the cushion plate flat, use M16*70 high-strength bolts for fixing, and other fixing methods to meet the same standards.
  2. Install the main unit Since the weight of the main unit of the fan is relatively large, special attention should be paid during installation. Use a level ruler to measure the verticality of the extension rod installation at 90 degrees. When the beam itself has a slope, its verticality can be adjusted through the crescent-shaped bolt holes of the base plate and the frame lifting ear. During installation, the upper plane and lower plane of the main unit should be horizontal, ensuring that the fan body naturally droops. Use a spirit level to measure and then tighten all fasteners (4 sets of M16 x140 high-strength bolts). M16x70 high-strength bolts, pressure plates, cushion plates, base plates, and I-beam steel beams, the cushion plate here needs to be closely attached to the I-beam, and if the thickness is not suitable, other auxiliary cushion plates need to be added to ensure that all parts are tightly pressed together. The bending part of the pressure plate here needs to be pressed against the cushion plate to avoid loosening. 
  3. Install the safety rope The steel wire rope goes around the factory beam to connect the fan main unit with the beam, and then use a wire rope clamp to strengthen the safety protection.
  4. Install the main rope First, determine the fixed positions around the four steel wire locks, move the lifting equipment to drill holes for positioning, and then start fixing the steel wire rope. Connect the main unit directly to the beam, and the steel wire should be of moderate length, equidistant, symmetrical, and evenly stressed. Adjust the fan's wheel hub to a horizontal position by tightening the four steel wire ropes. After the steel wire rope clamp and flower lacing wire are tightened, thread-locking glue (Loctite-243) should be applied to prevent the steel wire rope from loosening after being subjected to force.
  5. Install the cable connection of the main unit Do not scratch the surface of the cable wire, do not cut the copper wire when peeling the wire. First, connect the ground wire to black fine wire, and then use insulating tape to wrap it tightly to ensure the safety of the product. Then pull the cable out of the frame and wire it according to the on-site situation.
  6. Install the fan blades Two people cooperate to install the fan blades, using M10x60 high-strength countersunk bolts to fix the fan blades, diagonally install the fan blades, ensure even stress, do not scratch the surface of the fan blades, and ensure the tightness of the fasteners. After the fan blades are installed, the two steel wires passing through the interior of the fan blades are respectively threaded from bottom to top through the corresponding hinge bolt holes, and the two rope ends are combined at the upper part of the blade handle, and then fixed with corresponding steel wire rope clamps, and the excess part of the steel wire rope is cut off with a steel wire rope cutter.
  7. Install the fan blade safety ring When installing the fan blade connection plate, ensure that the rectangular hole is at the bottom and the round hole is at the top. Use M8x70 high-strength bolts to install them in order, and then form a circular shape to connect all the blades to each other. Finally, apply thread-locking glue to ensure the reliability of the fan operation. The above seven steps for installing an industrial ceiling fan are basically completed. Remember to pay attention to some detailed operations during installation. Any imperfection in detail may affect the stability and safety of the entire industrial ceiling fan system. At the same time, rigorous and meticulous training should be given to the installation team.
Related News
Read More >>
How many blades are good for HVLS industrial fans? How many blades are good for HVLS industrial fans?
Jun .30.2023
The HVIST fan was invented by a joint venture between a US and a Chinese company in 1999. After almost 20 years of development, various industrial fans with different numbers of blades have emerged. Currently, domestically and internationally, industrial fans mainly come in three-blade, four-blade, five-blade, six-blade, and eight-blade configurations. In theory, the more blades a fan has, the greater the airflow. However, since industrial fans are generally larger in size, more blades also mean more weight and increased safety risks. Therefore, it is necessary to strike a good balance between airflow and quality. Currently, industrial fans with five or six blades are most popular on the market. These two types are also the main products promoted abroad and have been market-certified for over a decade. As long as manufacturers strictly require high quality and safety for the blades, they can meet market demand.
Large fans in the indoor basketball hall improve ventilation and cooling Large fans in the indoor basketball hall improve ventilation and cooling
Jun .27.2023
With the promotion of nationwide fitness, various communities have built indoor basketball courts of different sizes. However, the large span, high height, and relatively sealed building structure of basketball courts pose great challenges to ventilation and cooling. In recent years, many venue constructors have found that large fans (big ceiling fans) can perfectly solve the ventilation and cooling problems, which are tricky for indoor basketball courts.
Principles to be followed in designing industrial large fan blades Principles to be followed in designing industrial large fan blades
Jun .27.2023
Industrial large fans have been imported into China from abroad, and batches of industrial fan manufacturers have been continuously researching, developing, and producing a full range of large industrial fan series products suitable for various environmental improvements in China. High-quality large fans are often built on good materials and unique advanced designs. The fan blades of industrial large fans are made of 5052 aviation aluminum, and unique blade designs can maximize the advantages of large fans and meet the needs of different users. When designing fan blades, industrial fan manufacturers need to follow certain principles.
pop_close
pop_main
Stay In The Know
In order to know your requirements well and offer the suitable solution for you, could you please fill in the following information?